Growth and characterization of a new inorganic metal-halide crystal structure, InPb2Cl5.

A new solid-state inorganic compound, indium dilead penta-chloride, InPb2Cl5, was synthesized by melting InCl and PbCl2 in a vacuum-sealed quartz ampoule. The ampoule was heated to 793 K and then slowly cooled to room temperature to induce crystallization of InPb2Cl5. InPb2Cl5 crystallizes in the monoclinic crystal system adopting a space group of type P21/c, which is isostructural with other metal halides such as RbPb2Cl5, KPb2Cl5 and TlPb2Cl5. The bulk InPb2Cl5 exhibits a metallic black/grey colour, allowing it to be separated from white/yellow PbCl2 crystals. Due to the incongruent nature of the compound, the pure bulk InPb2Cl5 was not obtained. The black/grey InPb2Cl5 crystals were characterized by powder and single-crystal X-ray diffraction. InPbCl3 was also explored, however the growth was unsuccessful.

Investigating electrochemical deposition of gold on commercial off-the-shelf 3-D printing materials towards developing sensing applications.

The COVID-19 pandemic highlighted the inaccessibility of quick and affordable clinical diagnostics. This led to increased interest in creating low-cost portable electrochemical (EC) devices for environmental monitoring and clinical diagnostics. One important perspective is to develop new fabrication methods for functional and low-cost electrode chips. Techniques, such as electron beam and photolithography, allow precise and high-resolution electrode fabrication; however, they are costly and can be time-consuming. More recently, fused deposition modeling three-dimensional (3-D) printing is being used as an alternative fabrication technique due to the low-cost of the printer and rapid prototyping capability. In this study, we explore enhancing the conductivity of 3-D printed working electrodes with EC gold deposition. Two commercial conductive filament brands were used and investigated to fabricate electrode chips. Furthermore, strategies to apply epoxy glue and conductive silver paint were investigated to control the electrode surface area and ensure good electrical connection. This device enables detection at drinking water concentration thresholds. The practical application of the fabricated electrodes is demonstrated by detecting Cu2+ using anodic stripping voltammetry.

NHC-Stabilized Au10 Nanoclusters and Their Conversion to Au25 Nanoclusters.

Herein, we describe the synthesis of a toroidal Au10 cluster stabilized by N-heterocyclic carbene and halide ligands via reduction of the corresponding NHC-Au-X complexes (X = Cl, Br, I). The significant effect of the halide ligands on the formation, stability, and further conversions of these clusters is presented. While solutions of the chloride derivatives of Au10 show no change even upon heating, the bromide derivative readily undergoes conversion to form a biicosahedral Au25 cluster at room temperature. For the iodide derivative, the formation of a significant amount of Au25 was observed even upon the reduction of NHC-Au-I. The isolated bromide derivative of the Au25 cluster displays a relatively high (ca. 15%) photoluminescence quantum yield, attributed to the high rigidity of the cluster, which is enforced by multiple CH-π interactions within the molecular structure. Density functional theory computations are used to characterize the electronic structure and optical absorption of the Au10 cluster. 13C-Labeling is employed to assist with characterization of the products and to observe their conversions by NMR spectroscopy.

Directed Ortho and Remote Metalation of Naphthalene 1,8-Diamide: Complementing SEAr Reactivity for the Synthesis of Substituted Naphthalenes.

Mono- and dianion species of 1,8-naphthalene diamide 2 were generated under sec-BuLi/TMEDA conditions and trapped with a variety of electrophiles to give 2- and 2,7- substituted products 3 and 4. Using Suzuki-Miyaura cross-coupling, mono- and di-iodinated products were converted into the corresponding 2-aryl (5) and 2,7-diaryl (6) products, respectively. The amide-amide rotation barrier of 2 was established by VT NMR, and the structure of fluorenone structure 9, obtained by remote metalation, was secured.

Formylation of Amines by CO2 Hydrogenation Using Preformed Co(II)/Nickel(II) Complexes.

Preparation of formamides by CO2 hydrogenation requires an efficient catalyst and temperatures around 100 °C or higher, but most catalysts reported so far incorporate rare and toxic precious metals. Five cobalt(II) or nickel(II) complexes with dmpe or PNN (dmpe = 1,2-bis(dimethylphosphino)ethane; PNN = [(2-(di-tert-butylphosphinomethyl)-6-diethylaminomethyl)pyridine) have been evaluated as precatalysts for the hydrogenation of CO2 to prepare formamides from the corresponding secondary amines. The most active catalyst for these reactions was found to be [NiCl2(dmpe)] in DMSO, producing dimethylformamide (DMF) from CO2, H2, and dimethylamine in up to 6300 TON, the highest activity reported for this reaction with an abundant metal-phosphine complex.

Stabilization and Solvent Driven Crystal-to-Crystal Transition between New Bismuth Halides.

The investigations of bismuth halide chemistry in DMSO/MeOH solutions led to the discovery of a new solvent-stabilized compound with a chemical formula of Cs3BiBr6·3DMSO. In addition, a new phase of Cs3BiBr6 was generated as a result of a crystal-to-crystal transition driven by the change in the solvent composition. The solvent stabilized Cs3BiBr6·3DMSO adopts an orthorhombic P212121 type crystal structure with unit cell dimension of a = 13.6160(6) Å, b = 14.4359(8) Å, and c = 14.6487(7) Å. Bulk single crystals of Cs3BiBr6·3DMSO with average size of 4.5 × 3.5 × 3.5 mm3 were grown by the antisolvent crystal growth method. With the change of the solvent composition from 2:1 DMSO: MeOH to 1:1 DMSO: MeOH, the single crystals of Cs3BiBr6·3DMSO underwent a crystal-to-crystal transition yielding another structurally distinct Cs3BiBr6 phase, with a tetragonal P42/m type structure and unit cell dimensions of a = 9.8394(5) Å, b = 9.8394(5) Å, and c = 8.0950(6) Å. Both compounds exhibit isolated BiBr6 octahedral resembling the structures of the zero-dimensional (0D) perovskites.

Rh(i) and Ru(ii) phosphaamidine and phosphaguanidine (1,3-P,N) complexes and their activity for CO2 hydrogenation.

Phosphaamidine metal complexes Rh2Cl2[Ph2PC(Ph)[double bond, length as m-dash]NPh]2µ-CO (1), RuCl2[Ph2PC(Ph)[double bond, length as m-dash]N(Ph)]2 (2), [Rh{iPr2PC(Ph)[double bond, length as m-dash]NiPr}(COD)]BF4 (3), and RuCl2[iPr2PC(Ph)[double bond, length as m-dash]NiPr](DMSO)2 (4) are prepared by combining phosphaamidines Ph2P-C(Ph)[double bond, length as m-dash]NPh and iPr2P-C(Ph)[double bond, length as m-dash]NiPr (1,3-P,N) with their corresponding metal ions. Complexes 1 and 2 are stable in air while 3 and 4 are stable under inert conditions. For further comparison of structure and stability, a Ru(ii) phosphaguanidine complex, RuCl2[Me2NC(PPh2)[double bond, length as m-dash]NiPr](DMSO)2 (6) was prepared. Complex 6 is stable in air and in the presence of water. The structures of the phosphaamidine and phosphaguanidine complexes, determined using single crystal X-ray diffraction, revealed P,N bidentate coordination. While all five complexes have some activity as precatalysts, complex 6 was the most active.

Isolation and characterization of tambjamine MYP1, a macrocyclic tambjamine analogue from marine bacterium Pseudoalteromonas citrea.

Tambjamines are natural products that consist of a conserved bipyrrole core functionalized with different imines giving rise to many derivatives. The core structure of tambjamines allows ion coordination through the nitrogen atoms, which is a key aspect in many of their observed antimicrobial, anticancer, and antimalarial bioactivities. Minor variances in the compound structure have a considerable impact on the potency of these activities, so identifying new analogues is valuable for maximizing tambjamine biological potential. In this work, we describe the isolation and structure elucidation of the first naturally occurring macrocyclized tambjamine, tambjamine MYP1, from the marine microbe Pseudoalteromonas citrea. We also compare the apparent pK a of cyclic and linear tambjamine analogues and discuss how structural strain may effect the compound's ion coordination abilities.

Pyrimidine as an Aryl C-H Activating Group.

The Pd-catalyzed regioselective C-H activation/arylation, /iodination, and/acetoxylation reactions of 4-arylpyrimidines using aryl iodides, N-iodosuccinimide, and (diacetoxyiodo)benzene respectively as coupling partners are described. Suzuki-Miyaura coupling and Sonogashira reactions of the resulting aryl iodides are demonstrated. The scalability of the C-H activation/functionalization starting with readily accessible 4-aryl pyrimidines is also reported.

Chemical and Structural Information from the Enamel of a Troodon Tooth Leading to an Understanding of Diet and Environment.

Synchrotron micro X-ray fluorescence (XRF) spectroscopy with two-dimensional element mapping, micro X-ray diffraction (XRD), electron spin resonance spectroscopy (ESR) and atomic force microscopy (AFM) were used to investigate the chemical and structural nature of the enamel of a tooth from Troodon, a small theropod dinosaur. These methods show that the crystallites in the Troodon tooth are submicron-sized carbonated calcium hydroxyapatite, which are semi-randomly oriented with a preferred orientation of (002) towards the surface of the tooth. Transition metal ions are distributed in the voids between crystallite clusters. Comparison of the ESR spectra indicates that the Troodon tooth had less exposure to UV than a fossilized crocodile tooth.

Unusual Fragmentation and Transformation of an N-Heterocyclic Carbene by a Stable Phosphonium-Borane peri-Functionalized Naphthalene.

A 1-phosphonium-8-borane-decorated naphthalene molecule 2 has been found to react with N,N'-dimethylimidazol-2-ylidene (IMe), a popular member of the N-heterocyclic carbene (NHC) family, which converts it into two vinyl-amine fragments one of which is trapped between the phosphonium and borane unit by the formation of a C-C and a B-N bond. The same reactivity was not observed for larger NHC molecules. Control experiments and mechanistic studies have established the involvement of an ylide-borane molecule and an imidazolium salt in addition to IMe carbene in this new transformation of an NHC.

Highly selective directed arylation reactions via back-to-back dehydrogenative C-H borylation/arylation reactions.

Dimeric rhodium N-heterocyclic carbene complexes are demonstrated to be effective catalyst precursors for directed C-H borylation reactions at room temperature. The reactions are highly selective for mono-borylation and can be combined with a one-pot Suzuki-Miyaura coupling to give C-H arylation products with exclusive selectivity for mono-arylation without the requirement for steric blocking groups.

A flexible approach to strained sandwich compounds: chiral [1]ferrocenophanes with boron, gallium, silicon, and tin in bridging positions.

The enantiomerically pure dibromoferrocene 3 [(Sp,Sp )-1,1'-dibromo-2,2'-di(isopropyl)ferrocene], equipped with two iPr groups in α positions, was prepared using known "Ugi amine" chemistry. Species 3 was targeted in order to gain access to new [1]ferrocenophanes ([1]FCPs) to be used as monomers for ring-opening polymerization. The iPr groups on the sandwich unit were introduced to stabilize bridging moieties, as well as to increase solubilities of targeted metallopolymers. The planar chiral dibromide 3 can quantitatively be lithiated at 0°C [2 equiv nBuLi, hexanes/thf (9:1), 30 min]. Salt-metathesis reactions with respective element dichloride species gave chiral [1]FCPs with a variety of bridging moieties [ERx =Ga[2-(Me2NCH2)C6H4] (4 a), SiMe2 (4 b), SntBu2 (4 c), BNiPr2 (4 d)]. The new [1]FCPs were fully characterized including single-crystal X-ray analysis. The stabilizing iPr groups on the Cp rings increase the thermal stabilities of 4 b-d compared to known [1]FCPs, equipped with the same bridging moieties. All three compounds 4 b-d are volatile and could be isolated by vacuum sublimation. Our new approach to [1]FCPs has the potential to overcome many of the existing difficulties in ferrocenophane chemistry, such as limited stability of starting monomers and low solubilities of resulting polyferrocenes.

Structural variation in ethylenediamine and -diphosphine adducts of (2,6-Me2C6H3S)2Pb: a single crystal X-ray diffraction and 207Pb solid-state NMR spectroscopy study.

Coordination complexes of (2,6-Me2C6H3S)2Pb (1) with flexible bidentate ligands have been prepared to explore new bonding environments for Pb(II) thiolates. The reaction of 1 with a series of ethylenediamine and ethylenediphosphine ligands resulted in isolation of the adducts [(2,6-Me2C6H3S)2Pb]2(tmeda) (9), [(2,6-Me2C6H3S)2Pb]3(dmpe) (10) and [(2,6-Me2C6H3S)2Pb]2(dppe) (11) [tmeda = N,N,N',N'-tetramethylethylenediamine; dmpe = bis(dimethylphosphino)ethane; dppe = bis(diphenylphosphino)ethane]. The X-ray crystal structure of 9 shows a dinuclear species in which tmeda is chelating a ψ-trigonal bipyramidal S2N2 Pb centre via axial and equatorial sites. The structure of 10 displays a trinuclear structural unit in which dmpe is chelating a ψ-trigonal bipyramidal S2P2 Pb centre via equatorial sites. Compounds 9 and 10 also contain a second unique metal centre with ψ-tetrahedral S3Pb bonding motifs. The structure of 11 shows the dppe ligand bridging two Pb ψ-tetrahedral S2P metal bonding environments. Static (207)Pb solid-state NMR (SSNMR) spectra of 9-11 and [Ph4As][(PhS)3Pb] (12) were acquired with cross polarization (CP)-CPMG and frequency swept pulse (WURST)-CPMG pulse sequences, and the efficiencies of these pulse sequences are compared. The (207)Pb SSNMR spectra reveal that the lead chemical shift anisotropies (CSA) vary greatly between the different Pb sites, and are generally large in magnitude. DFT calculations are utilized to relate the orientations of the (207)Pb nuclear magnetic shielding tensors to the molecular structures, and to aid in spectral assignment where multiple Pb centres are present. The combination of X-ray diffraction, (207)Pb SSNMR and DFT is shown to be invaluable for the structural characterization of these important structural motifs, and should find wide-ranging application to numerous lead coordination compounds.

Unprecedented spirocyclization of 3-methyleneindoline-2-thiones during hydrolysis of the phytoalexin cyclobrassinin.

The phytoalexin cyclobrassinin is a plant defense that has additional importance since it inhibits brassinin hydrolase, a phytoalexin detoxifying enzyme produced by the plant pathogen Alternaria brassicicola. Hence, the 1,3-thiazino[6,5-b]indole scaffold of cyclobrassinin has great application as a lead structure to design potential inhibitors of brassinin detoxification. For this reason, it is necessary to determine whether A. brassicicola is able to transform cyclobrassinin. During this work new reactions of 1,3-thiazino[6,5-b]indoles and indoline-2-thiones and their unique [4+2] cycloaddition products were discovered and characterized.

[1.1]Ferrocenophanes and bis(ferrocenyl) species with aluminum and gallium as bridging elements: synthesis, characterization, and electrochemical studies.

Salt-metathesis reactions between dilithioferrocene (Li(2)fc·2/3tmeda) and intramolecularly coordinated aluminum and gallium species RECl(2) [R = 5-Me(3)Si-2-(Me(2)NCH(2))C(6)H(3); E = Al (2a), Ga (2b); and R = (2-C(5)H(4)N)Me(2)SiCH(2); E = Al (3a), Ga (3b)] gave respective [1.1]ferrocenophanes ([1.1]FCPs). Those obtained from 2a and 2b, respectively, were isolated as analytically pure compounds and fully characterized including single-crystal X-ray structure determinations [4a (Al): 43%; 4b (Ga): 47%]. Bis(ferrocenyl) compounds of the type REFc(2) [R = 5-Me(3)Si-2-(Me(2)NCH(2))C(6)H(3); E = Al (5a), Ga (5b); and R = (2-C(5)H(4)N)Me(2)SiCH(2); E = Al (6a), Ga (6b)] and R(2)SiFc(2) [R = Me (7(Me)); Et (7(Et))] were prepared, starting from respective element dichlorides and lithioferrocene (LiFc). Molecular structures of 6a, 7(Me), and 7(Et) were solved by single-crystal X-ray analyses. One of the two Fc moieties of 6a was bent toward the open coordination site of the aluminum atom. The measured dip angles α* of the two independent molecules in the asymmetric unit were 11.9(5) and 13.3(5)°, respectively. The redox behavior of [1.1]FCPs 4 and bis(ferrocenyl) species 5, 6, 7, and (Mamx)EFc(2) [Mamx = 2,4-tBu(2)-6-(Me(2)NCH(2))C(6)H(2); E = Al (8a), Ga (8b)] were investigated with cyclic voltammetry. While all gallium and silicon compounds gave meaningful and interpretable data, all aluminum compounds were problematic with the exception of 8a. Aluminum species, compared to respective gallium species, are more sensitive and, presumably, fluoride ions or residual water from the electrolyte and solvent are causing degradation. The splitting between the formal potentials for bis(ferrocenyl) species was significantly smaller (5b, 6b, and 8b: ΔE°' = 0.138-0.159 V) than that of the [1.1]FCP 4b (ΔE°' = 0.309 V). These results were explained by assuming an electrostatic interaction between the two iron centers; differences between bis(ferrocenyl) species and [1.1]FCPs are likely due to a more effective solvation of Fe-containing moieties in the more flexible bis(ferrocenyl) species.

Cyclic and linear polyferrocenes with silicon and tin as alternating bridges.

The synthesis and characterization of ferrocene-based oligomers that contained two different elements (Si and Sn) as alternating bridges is described for the first time. The salt-metathesis reaction of R(2) Si[(C(5) H(4) )Fe(C(5) H(4) Li)](2) (R=Me, Et) with R'(2) SnCl(2) (R'=Me, nBu, tBu) afforded a mixture of oligomers (6(Me) SnMe(2), 6(Et) SnMe(2), 6(Me) SnnBu(2), 6(Et) SnnBu(2), 6(Me) SntBu(2), and 6(Et) SntBu(2)). These oligomers were characterized by (1) H, (13) C, (29) Si, and (119) Sn NMR spectroscopy and by mass spectrometry. MS (MALDI-TOF) studies of 6(Et) SnMe(2) revealed the presence of linear (l) and cyclic (c) species that contained up to 20 ferrocene moieties. The molecular weights of the polymers were determined by gel-permeation chromatography (GPC) and by dynamic-light scattering (DLS). GPC analysis revealed average molecular weights of 2100-6300 Da with respect to polystyrene as a standard. DLS analysis yielded very similar results. Some compounds, c-(6(Me) SnMe(2) )(1), c-(6(Me) SntBu(2))(2), c-(6(Et) SnMe(2))(1), c-(6(Et) SntBu(2))(2), l-(6(Me) SnnBu(2) )(2), and l-(6(Me) SnnBu(2))(3), which contained up to six ferrocene moieties, were isolated in their pure form either by column chromatography or by crystallization. The Si- and Sn-bridged macrocycles that contained four ferrocene units (c-(6(Me) SntBu(2))(2) and c-(6(Et) SntBu(2))(2)) were structurally characterized by single-crystal X-ray analysis.

Ferrocenophanes with gallium and silicon as alternating bridges.

[1.1]Ferrocenophanes with gallium and silicon in bridging positions have been prepared in yields of 29 and 41%, respectively. From the same reactions, polymer-containing fractions were isolated (31% in each case) and shown to be comprised of linear and cyclic species with up to 16 ferrocene units (MALDI-TOF analysis).

Understanding the reactivity of strained sandwich compounds with aluminum or gallium in bridging positions: experiments and DFT calculations.

The aluminum and gallium dichlorides (Mamx)ECl(2)1a (E = Al; 82%) and 1b (E = Ga; 79%) (Mamx = 2,4-di-tert-butyl-6-[(dimethylamino)methyl]phenyl) reacted with dilithioferrocene or dilithioruthenocene to give [1]ferrocenophanes (2a, 2b) and [1]ruthenocenophanes (3a, 3b), respectively. The galla[1]ruthenocenophane 3b could be isolated from the reaction mixture through precipitation into hexane (50%), while 2a, 2b, and 3a underwent ring-opening polymerization under the reaction conditions of their formation reactions to give metallopolymers (M(w) (DLS) between 8.07 and 106 kDa). Monomer 3b was polymerized using Karstedt's catalyst resulting in an M(w) of 28.6(±6.3) kDa. In order to get an indication of the structure of polymers, bis(ferrocenyl) compounds (Mamx)EFc(2) (E = Al (4a), 51%; E = Ga (4b), 49%) were prepared and characterized by single crystal X-ray analysis. DFT calculations shed some light on the unexpected high reactivity of these new strained sandwich species. Optimized geometries of known aluminum and gallium-bridged [1]ferrocenophanes (Al(Pytsi) (6a), Ga(Pytsi) (6b); Pytsi = [dimethyl(2-pyridyl)silyl]bis(trimethylsilyl)methyl) and [1]ruthenocenophanes (Al(Me(2)Ntsi) (7a), Ga(Me(2)Ntsi) (7b); Me(2)Ntsi = [(dimethylamino)dimethylsilyl]bis(trimethylsilyl)methyl) matched very well with experimental molecular structures. Geometries of species 2a, 2b, 3a, and 3b were optimized (BP86/TZ2P) and the structural influence of the tBu group of the Mamx ligand in ortho position was evaluated by optimizing molecular structures of the four unknown species where the ortho-tBu group was replaced by an H atom (2a(H), 2b(H), 3a(H), and 3b(H)). The most pronounced structural effect was seen as a change of the orientation of the bridging moiety with respect to the sandwich unit. As the tBu group was removed, the aromatic ligand moved toward the freed-up space. The energetics (ΔE, ΔH(298K), and ΔG(298K)) accompanied by the structural changes were evaluated by a hydrogenolysis reaction of strained species resulting in Cp(2)M (M = Fe, Ru) and respective aluminum and gallium dihydrides. This nonisodesmic reaction showed that [1]metallocenophanes equipped with the ortho-tBu group were on average 5.5 kcal/mol higher strained (ΔH(298K)) than species where the tBu group was lacking. The investigation of the isodesmic reaction between strained species and Cp(2)M yielding bis(metallocenyl) compounds revealed that the ortho-tBu group sterically interacts with one of the metallocenyl units. The bis(metallocenyl) compounds are model compounds for the respective metallopolymers and one can conclude that even though the ortho-tBu group imposes additional strain on the starting metallocenophanes, this effect cancels out in ROPs because the ortho-tBu group imposes a similar strain on the resulting polymers. The uncovered steric repulsion between the ortho-tBu group and the sandwich moieties probably causes the ortho-tBu to act as an unusually sensitive NMR probe of the tacticity of the polymers.

Cyclo-linopeptide B methanol tris-olvate.

The title compound, C(56)H(83)N(9)O(9)S·3CH(3)OH, is a methanol tris-olvate of the cyclo-linopeptide cyclo(Met(1)-Leu(2)-Ile(3)-Pro(4)-Pro(5)-Phe(6)-Phe(7)-Val(8)-Ile(9)) (henceforth referred to as CLP-B), which was isolated from flaxseed oil. All the amino acid residues are in an l-configuration based on the CORN rule. The cyclic nona-peptide exhibits eight trans peptide bonds and one cis peptide bond observed between the two proline residues. The conformation is stabilized by an α-turn and two consecutive ß-turns each containing a N-H⋯O hydrogen bond between the carbonyl group O atom of the first residue and the amide group H atom of the fourth (α-turn) or the third residue (ß-turns), repectively. In the crystal, the components of the structure are linked by N-H⋯O and O-H⋯O hydrogen bonds into chains parallel to the a axis.